TC16540| Mill Diameter (Inch) | 5/8 |
| Mill Diameter (Decimal Inch) | 0.6250 |
| Number Of Flutes | 4 |
| End Mill Material | Solid Carbide |
| Length of Cut (Inch) | 2-1/4 |
| Coating/Finish | Bright/Uncoated |
| Overall Length (Inch) | 5 |
| Shank Diameter (Inch) | 5/8 |
| Extended Reach | No |
| Variable Helix | No |
| Variable Index | No |
| Helix Angle | 30 |
| Overall Length (Decimal Inch) | 5.0000 |
| Chipbreaker | No |
| Undercutting | No |
| Length Of Cut Range (Decimal Inch) | 1.5000+ |
| Length Type | Standard |
| Helix Style | Medium |
| Material Removal Type | Roughing & Finishing |
| Shank Diameter (Decimal Inch) | 0.6250 |
| Nose Radius (Decimal Inch) | 0.3125 |
| Reach Length (Inch) | 2-1/4 |
| Reach Length (Decimal Inch) | 2.2500 |
| Mill Diameter Tolerance | +0.0000/-0.0030 in |
| Shank Diameter Tolerance | h6 |
| Maximum Helix Angle | 30 |
| Minimum Helix Angle | 30 |
| Primary Workpiece Material | Non-Ferrous Metal; Stainless Steel; Cast Iron; Superalloys & Titanium; Steel |
| Primary Workpiece Material Code | P; S; K; M; N |
| Material Grade | Carbide |
| Flute Direction | Right Hand |
| Cutting Direction | Right Hand |
| Series | Carbide – 4 Flute – Ball – 30° Helix, General Purpose End Mills |
| Flute Type | Spiral |
| UNSPSC Code | 27112803 |
| Centercutting | Yes |
| Coating Classification | Uncoated |
| Single Or Double End | Single |
| Shank Type | Straight-Cylindrical |
| Pitch | Normal |
| Coolant Through | No |
| Length Of Cut (Decimal Inch – 4 Decimals) | 2.2500 |
| Manufacturers Catalog Number | TC16540 |
| System Of Measurement | Fractional Inch |
TC16540, 07259336, 88247374, E5060040, 14548028, 319496, 32144404, 33114, 02716942, 464-6250-BN, 58557869, 9031640158700, 85320406, 88339403, M33220, 62006184, 421016006, 76600873, C63568
Valoraciones
No hay valoraciones aún.