39116| SKU / EDP | 39116 |
| Category | Solid Round Tools > Milling > General Application End Mills |
| Series | 01B |
| Series Description | General Application End Mill |
| High Performance | No |
| End Configuration | Ball Nose |
| Tool Length | Long |
| Unit (inch/mm) | inch |
| Number of Flutes | 4 |
| Primary Workpiece Material | (P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy |
| Secondary Workpiece Material | (H) Hardened Materials |
| Cutting Diameter (DC) (Decimal Inch) | 0.125 |
| Cutting Diameter (DC) (Fractional Inch) | `1/8 |
| Cutting Diameter (DC) (mm) | 3.18 |
| Shank Diameter (DCON) (Decimal Inch) | 0.125 |
| Shank Diameter (DCON) (Fractional Inch) | `1/8 |
| Shank Diameter (DCON) (mm) | 3.18 |
| Length of Cut (APMX) (Decimal Inch) | 0.5 |
| Length of Cut (APMX) (Fractional Inch) | `1/2 |
| Length of Cut (APMX) (mm) | 12.7 |
| Overall Length (LF) (Decimal Inch) | 1.5 |
| Overall Length (LF) (Fractional Inch) | `1-1/2 |
| Overall Length (LF) (mm) | 38.1 |
| Shank Length (LS) (Decimal Inch) | 1 |
| Shank Length (LS) (Fractional Inch) | 1 |
| Shank Length (LS) (mm) | 25.4 |
| Cutting Diameter (DC) Tolerance (Decimal Inch) | `+0.0000/-0.0020 |
| Cutting Diameter (DC) Tolerance (mm) | `+0.000/-0.050 |
| Shank Diameter (DCON) Tolerance (ISO) | h6 |
| Corner Radius (RE) Tolerance (Decimal Inch) | `+0.0000/-0.0010 |
| Corner Radius (RE) Tolerance (mm) | `+0.000/-0.025 |
| Shank Type | Straight |
| Weldon Flat | No |
| Coolant Option | External Coolant |
| Coating Description | TiN (Ti-NAMITE) |
| Additional Geometry | Right Hand Cut Direction (RHC) |
| Rake Angle | Positive |
| Helix Angle | Right Spiral |
| Helix Angle (Degree) | 30 |
| Variable Helix | No |
| Center Cutting | Yes |
| Chip Breaker | No |
39116, 59004242, 74610577, E6250008, 54110283, 54110283, 36711703, N98657, 45238615, U100204, 87711511, TC95712,
Reviews
There are no reviews yet.