5-134-0169| Drill Bit Size (mm) | 4.30 |
| Drill Bit Size (Decimal Inch) | 0.1693 |
| Drill Bit Material | High Speed Steel |
| Drill Point Angle (Degrees) | 118 |
| Coating/Finish | TiN |
| Spiral Type | Regular |
| Flute Type | Spiral |
| Cutting Direction | Right Hand |
| Point Type | N |
| Primary Workpiece Material | Cast Iron; Steel |
| Specification Number | DIN 338 |
| Coolant Through | No |
| Primary Workpiece Material Code | P; K |
| Shank Diameter (Decimal Inch) | 0.1693 |
| Overall Length (mm) | 80.00 |
| Overall Length (Decimal Inch) | 3.1496 |
| Flute Length (mm) | 47.00 |
| Flute Length (Decimal Inch) | 1.8504 |
| Series | A1211TIN |
| Tool Application | Blind Hole; Stack Drilling |
| Flute By Diameter Ratio | 8xD |
| Shank Diameter (mm) | 4.30 |
| Maximum Drilling Depth (Decimal Inch) | 1.5354 |
| Maximum Drilling Depth (mm) | 39.00 |
| Shank Length (mm) | 33.00 |
| Shank Length (Decimal Inch) | 1.2992 |
| Drill Point Length (mm) | 1.29 |
| Drill Point Length (Decimal Inch) | 0.0509 |
| Drill Bit Diameter Tolerance | h8 |
| Web Thinning | Web-Thinned |
| Web Configuration | Tapered |
| Tool Performance | High Performance |
| Shank Type | Straight-Cylindrical |
| Standards | ISO; ANSI |
| Number of Flutes | 2 |
| Drill Bit Size Range (Decimal Inch) | 0.1500 – 0.2000 |
| Drill Bit Size Range (mm) | 4.00 – 5.00 |
| Material Grade | M2 |
| Specification Designation | DIN |
| UNSPSC Code | 23241634 |
5-134-0169, 80981517, 5967237, 53034195, 5058934
Valoraciones
No hay valoraciones aún.